Biggest display in its class and award-winning user interface
With the same made-for-touch user interface technology as the award-winning 5 Series and the largest and highest resolution display in its class, the 4 Series MSO sets a new expectation of how a scope should work.
- 13.3-inch HD display
- 6.1-inch (15.5 cm) deep bench-friendly footprint.
Outstanding details and up to 6 super-flexible channels
- Any channel can show a waveform, spectrum, or both
- Any input can be used to view eight digital channels by connecting a logic probe
- Outstanding detail and accurate measurements on all channels
- 12-bit vertical resolution (16-bit in high res mode)
- 6.25 GS/s on all analog and digital channels
- Up to 62.5 Mpoints record length
Specs at a glance
Input Channels
- 4 or 6 FlexChannel inputs
- Each FlexChannel provides 1 analog signal input or 8 digital logic inputs with TLP058 probe
Bandwidth1
- 200 MHz, 350 MHz, 500 MHz, 1 GHz or 1.5 GHz
Sample Rate
- 6.25 GS/s on all analog/digital channels
Record Length
- 31.25 or 62.5 Mpoints
Vertical Resolution
- 12 bits
- Up to 16 bits in High Res mode
Signal Generation1
- Arbitrary, Sine, Square, Pulse, Ramp, Triangle, DC Level, Gaussian, Lorentz, Exponential Rise/Fall, Sin(x)/x, Random Noise, Haversine, Cardiac
Digital Voltmeter2
- 4-digit AC RMS, DC
- DC+AC RMS voltage
Trigger Frequency Counter2
- 8-digit
Advanced Analysis1
- Automated Power Measurements
- Spectrum View Mixed Domain Analysis
Protocol Support3
- 10BASE-T, 100BASE-TX
- CAN, CAN FD, LIN, FlexRay
- I2C, SPI
- MIL-STD-1553, ARINC 429
- RS-232, RS-422, RS-485, UART
- SPMI
- SVID
- USB 2.0 LS, FS, HS
Display
- 13.3-inch (338 mm)
- HD color (1920 x 1080) capacitive touchscreen
Dimensions (H x W x D)
- 249 mm x 405 mm x 155 mm
- (9.8 in x 15.9 in x 6.1 in)
Weight
- 16 lbs (7.3 kg)
Industry-Leading Probes
Accurate measurements start with great probes. Every 4 Series comes with the best passive probes in the industry, with loading of just 3.9 pF and up to 1 GHz bandwidth. The TPP Series probes will be your go-to probes for everyday use.
Highlights
- TPP Series probes included standard. One per analog channel.
- Industry-best capacitive probe loading of 3.9 pF
- 250 MHz, 500 MHz or 1 GHz probe bandwidth depending on instrument bandwidth
Versatile and upgradeable
Get all the debug tools you need right away or add them when you need them – without having to send it back.
- Bandwidth up to 1.5 GHz
- Record length up to 62.5 Mpoints
- Digital channels: each TLP058 logic probe provides 8 digital channels
- DVM/Freq Counter (free with registration)
- Arbitrary/Function Generator
- Advanced Analysis
- Serial bus decoding and triggering
- Spectrum View mixed domain analysis
- Automated power measurements
| Model | Analog Bandwidth | Analog Channels | Digital Channels | Sample Rate | Record Length | List Price |
|---|---|---|---|---|---|---|
| MSO44 | 200 MHz to 1.5 GHz | 4 | Up to 32 (optional) | 6.25 GS/s | 31.25 M to 62.5 M | |
| MSO46 | 200 MHz to 1.5 GHz | 6 | Up to 48 (optional) | 6.25 GS/s | 31.25 M to 62.5 M |
| Tektronix 4 Series MSO | Tektronix MDO4000C | Keysight 4000T X-Series | LeCroy HDO4000A Series | Rohde & Schwarz RTA4000 Series | |
|---|---|---|---|---|---|
| Bandwidth | 200 MHz to 1.5 GHz | 200 MHz to 1 GHz | 200 MHz to 1.5 GHz | 200 MHz to 1 GHz | 200 MHz to 1 GHz |
| Analog Channels | 4 or 6 | 4 | 2 or 4 | 4 | 2 or 4 |
| Digital Channels (optional) | Up to 48 | 16 | 16 | 16 | 16 |
| Sample Rate (All Channels) | 6.25 GS/s | Up to 5 GS/s | 2.5 GS/s | 2.5 GS/s | 2.5 GS/s |
| Vertical Resolution | 12 bits | 8 bits | 8 bits | 12 bits | 10 bits |
| Record Length (All Channels) | 31.25 M 62.5 M (optional) | 20 M | 4 M | 12.5 M 25 M (optional) | 100 M |
| Integrated Arbitrary/Function Generator (optional) | 1 x 50 MHz | 1 x 50 MHz | 2 x 20 MHz | — | 1 x 25 MHz (opt) |
| Serial bus decoding | Yes | Yes | Yes | Yes | Yes |
| Display | 13.3 in touch (1920 x 1080) | 10.4 in (1024 x 768) | 12.1 in touch (800 x 600) | 12.1-in touch (1280 x 800) | 10.1 in touch (1280 x 800) |
| Standard Warranty | 3 years | 3 years | 3 years | 3 years | 3 years |
Embedded serial bus analysis
Serial bus decode and trigger options transform the 4 Series MSO into an indispensable tool for debugging serial buses with automatic decode, trigger, and search. Here are a few examples:
- I2C, SPI
- I3C
- RS-232 / 422 / 485 / UART
- USB 2.0
- Ethernet
Power integrity and power management
Today’s boards can have 20 or more power rails, many of which are less than a few volts with strict noise limits.
- Up to 6 analog input channels
- Compatible low-noise power-rail probes
- Decoding options for SVID and SPMI
Power supply measurements and analysis
Even with lower standby power, faster switching and stricter noise limits, the 4 Series can speed up power supply troubleshooting, optimization and validation.
- AC line and harmonics measurements
- Switching loss analysis
- DC power rails measurements
- Bode plots and power supply rejection ratio
- Wide range of current, power rail, differential, and optically-isolated probes
Automotive ECU design
Automotive systems demand robust communications between ECUs, sensors and actuators.
- Mixed signal views to look beyond processors at sensors, actuators, switches, and power
- Combine waveform and spectrum analysis for fast noise hunting with optional Spectrum View
- Decode and trigger on CAN, CAN FD, LIN, FlexRay, SENT or PSI5 traffic
Electromagnetic interference (EMI) troubleshooting
With the Spectrum View option each analog channel on the 4 Series MSO can show you a time domain waveform, a spectrum, or both. The time and frequency plots are synchronized to help you quickly determine which signals are the victims and which ones are the aggressors.
| Data Sheet | Software Package / Software Option | Description | Configure and Quote |
|---|---|---|---|
| Opt. 4-AFG | Add built-in Arbitrary/Function Generator | Contact Us | |
| Opt. 4-PS2 | Power Solution Bundle (4-PWR-BAS, THDP0200, TCP0030A, 067-1684-XX deskew fixture) | Contact Us | |
| Opt. 4-PWR | Advanced power measurement and analysis | Contact Us | |
| Opt. 4-PWR-BAS | Power measurement and analysis | Contact Us | |
| Opt. 4-RL-1 | Extend record length to 62.5 Mpoints/channel | Contact Us | |
| Opt. 4-SEC | Add password-protected enabling and disabling of all communication ports and firmware upgrades | Contact Us | |
| View Datasheet | Opt. 4-SRAERO | MIL-STD-1553 and ARINC 429 protocol trigger and decode of serial packet content | Contact Us |
| View Datasheet | Opt. 4-SRAUDIO | I2S, LJ, RJ, and TDM protocol trigger and decode of serial packet content | Contact Us |
| View Datasheet | Opt. 4-SRAUTO | CAN, CAN FD, LIN, and FlexRay protocol trigger and decode of serial packet content. | Contact Us |
| View Datasheet | Opt. 4-SRAUTOSEN | SENT prototcol trigger and decode of serial packet content | Contact Us |
| View Datasheet | Opt. 4-SRCOMP | RS-232/422/485/UART protocol trigger and decode of serial packet content | Contact Us |
| View Datasheet | Opt. 4-SREMBD | I2C and SPI protocol trigger and decode of serial packet content | Contact Us |
| View Datasheet | Opt. 4-SRENET | 10BASE-T and 100BASE-TX protocol search and decode of serial packet content | Contact Us |
| Opt. 4-SREUSB2 | eUSB2 protocol decoding and analysis | Contact Us | |
| View Datasheet | Opt. 4-SRI3C | I3C protocol trigger and analysis of serial packet content | Contact Us |
| Opt. 4-SRMDIO | MDIO protocol decoding and analysis | Contact Us | |
| View Datasheet | Opt. 4-SRPM | SPMI prototcol trigger and decode of serial packet content | Contact Us |
| Opt. 4-SRPSI5 | PSI5 serial decode and analysis | Contact Us | |
| View Datasheet | Opt. 4-SRSPACEWIRE | SpaceWire protocol decoding and analysis | Contact Us |
| Opt. 4-SRSVID | SVID protocol decoding and analysis | Contact Us | |
| View Datasheet | Opt. 4-SRUSB2 | Automated compliance testing and verification of USB 2.0 and 3.0 for low-speed, full-speed, high speed and superspeed | Contact Us |
| Opt. 4-SV-BAS | Spectrum View frequency-domain analysis | Contact Us | |
| Opt. 4-SV-BW-1 | Increase Spectrum View Capture Bandwidth to 500 MHz (4-SV-BAS required) | Contact Us | |
| Opt. 4-SV-RFVT | Spectrum View RF versus time analysis and trigger (4-SV-BAS required) | Contact Us | |
| Opt. 4-VID | Analog video trigger (NTSC, PAL, SECAM) | Contact Us |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TCP0020 | Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard | Configure & Quote |
| View Datasheet | TCP0030A | Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with TekVPI Interface; Certificate of Traceable Calibration Standard | Configure & Quote |
| View Datasheet | TCP0150 | Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI | Configure & Quote |
| View Datasheet | TRCP0300 | Current Probe: 30 MHz, 250 mA to 300 A, AC-Only, BNC Interface | Configure & Quote |
| View Datasheet | TRCP0600 | Current Probe: 30 MHz, 500 mA to 600 A, AC-Only, BNC Interface | Configure & Quote |
| View Datasheet | TRCP3000 | Current Probe: 16 MHz, 500 mA to 3000 A, AC-Only, BNC Interface | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TDP0500 | Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI | Configure & Quote |
| View Datasheet | TDP1000 | Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI | Configure & Quote |
| View Datasheet | THDP0100 | Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE | Configure & Quote |
| View Datasheet | THDP0200 | Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE | Configure & Quote |
| View Datasheet | TMDP0200 | Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200 | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | P6015A | PROBE HIVOLTAGE; 75MHZ,40KV,1000X 10 FT – CERTIFICATE OF TRACEABLE CALIBRATION STANDARD | Configure & Quote |
| View Datasheet | TPP0850 | High Voltage Probe: 800 MHz, 50X, 2.5 kV, Single-ended, TekVPI | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TIVH02 | IsoVu optically isolated differential probe, 200 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH02L | IsoVu optically isolated differential probe, 200 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH05 | IsoVu optically isolated differential probe, 500 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH05L | IsoVu optically isolated differential probe, 500 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH08 | IsoVu optically isolated differential probe, 800 MHz, TekVPI, 3 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVH08L | IsoVu optically isolated differential probe, 800 MHz, TekVPI, 10 m cable, includes 50X(MMCX50X) and 500X(SQPIN500X) tips | Configure & Quote |
| View Datasheet | TIVM1 | IsoVu optically isolated differential probe, 1 GHz, TekVPI, 3 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips | Configure & Quote |
| View Datasheet | TIVM1L | IsoVu optically isolated differential probe, 1 GHz, TekVPI, 10 m cable, includes 5X(IVTIP5X) and 25X(IVTIP25X) tips | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| TLP058 | 8 channel general purpose logic probe for 5 and 6 Series MSO oscilloscopes. Includes accessory kit. | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TDP1500 | Differential Probe: 1.5 GHz, 1X/10X, +/-8.5V, TekVPI | Configure & Quote |
| View Datasheet | TDP3500 | Differential Probe: 3.5 GHz, 5X, +/- 2V, TekVPI | Configure & Quote |
| View Datasheet | TDP4000 | 4 GHz, Differential Probe with TekVPI interface | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TAP1500 | Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI | Configure & Quote |
| View Datasheet | TAP2500 | Active Probe: 2.5 GHz, 10X, Single-ended, TekVPI | Configure & Quote |
| View Datasheet | TAP3500 | Active Probe: 3.5 GHz, 10X, Single-ended, TekVPI | Configure & Quote |
| View Datasheet | TAP4000 | 4 GHz, Single Ended Probe with TekVPI interface | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TPP0250 | Passive Probe: 250 MHz, 10X, TekVPI | Configure & Quote |
| View Datasheet | TPP0500B | Passive Probe: 500 MHz, 10X, TekVPI | Configure & Quote |
| View Datasheet | TPP0502 | Passive Probe: 500 MHz, 2X, TekVPI | Configure & Quote |
| View Datasheet | TPP1000 | Passive Probe: 1 GHz, 10X, TekVPI | Configure & Quote |
| Datasheet Link | Probe | Description | Configure and Quote |
|---|---|---|---|
| View Datasheet | TPR1000 | 1 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT Standard Accessory Kit | Configure & Quote |
| View Datasheet | TPR4000 | 4 GHz, Single-Ended TekVPI Power-Rail Probe with TPR4KIT Standard Accessory Kit | Configure & Quote |
| Datasheet | Datasheet | Accessory |
|---|---|---|
| HC4 | Hard transit case for the 4 Series MSO (includes front cover) | |
| RM4 | Rack mount kit for the 4 Series MSO | |
| SC4 | Soft carrying case and front protective cover for the 4 Series MSO | |
| Description Datasheet | TEK-DPG | Accessory, Deskew Pulse Generator Signal Source with TekVPI Scope Interface |
| Description Datasheet | TPA-BNC | Probe adapter from TekProbe-BNC to TekVPI |
Đánh giá
Chưa có đánh giá nào.