Outstanding RF performance, every day
With its outstanding RF performance, generous feature set and easily accessible standard controls, you can rely on the RSA5000B every day. The impressive sweep speed with high sensitivity lets you complete a 10 GHz span sweep with a noise floor of -110 dBm/Hz in just 22 seconds, and multiple traces, markers and standard measurements are always at the ready.
Highlights
- Familiar, independent controls: RBW, VBW, Quasi Peak detector, Zero-Span
- Comprehensive measurements: Channel Power, OBW, ACRL, Spurious, CCDF, Spectrogram
- Simultaneously see events in frequency, time domains, and real time
See real problems in real-time: DPX® technology
Discover the most difficult, hard-to-find problems with industry-best, powerful real-time architecture. Advanced, proprietary DPX® technology lets you see RF characteristics practically invisible to a conventional spectrum analyzer. Fully controllable and independent settings for Span, RBW, VBW in real time displays.
Highlights
- Detect any signal greater than 434 nsec with 100% probability of intercept—the industry’s best performance
- Fastest FFT engine: up to 3.125M FFTs/second
- Most complete: DPX Spectrum, DPX Spectrogram, DPX Zero Span
- Most powerful triggers: Frequency Mask, DPX Density, Runt, Level, Time Qualification for all triggers
| Model | Frequency Range | Real-Time Bandwidth | Minimum Event Duration for 100% POI | SFDR (typical) | List Price |
|---|---|---|---|---|---|
| RSA5126B | 1 Hz – 26.5 GHz | 25 MHz, 40 MHz, 80 MHz, 125 MHz and 165 MHz | 0.434 μs | -80 dBc | Configure & Quote |
| RSA5103B | 1 Hz – 3 GHz | 25 MHz, 40 MHz, 80 MHz, 125 MHz and 165 MHz | 0.434 μs | -80 dBc | Configure & Quote |
| RSA5106B | 1 Hz – 6.2 GHz | 25 MHz, 40 MHz, 80 MHz, 125 MHz and 165 MHz | 0.434 μs | -80 dBc | Configure & Quote |
| RSA5115B | 1 Hz – 15 GHz | 25 MHz, 40 MHz, 80 MHz, 125 MHz and 165 MHz | 0.434 μs | -80 dBc | Configure & Quote |
| Tektronix RSA5000B | Tektronix RSA7100A | Tektronix RSA607A | Keysight MXA N9020B | Keysight EXA N9010B | R&S FSV | R&S FSL | |
|---|---|---|---|---|---|---|---|
| Frequency Range | 1 Hz to 3, 6,2, 15, 26.5 GHz | 16 kHz to 14, 26.5 GHz | 9 KHz to 3, 7.5 GHz | 10 Hz to 26.5 GHz | 10 Hz to 3.6, 7, 13.6, 26.5, 32, 44 GHz | 10 Hz to 40 GHz | 9 kHz to 3 GHz, 6 GHz, 18 GHz |
| Maximum BW | 165 MHz | 800 MHz | 40 MHz | 160 MHz | 40 MHz | 160 MHz | 28 MHz |
| SFDR at Maximum Capture BW | -80 dBc | -60 dBc | -70 dBc | -69 dBc | -80 dBc | -65 dBc | -60 dBc |
| Phase Noise: 1 GHz CF, 10 KHz offset | -109 dBc/Hz | -134 dBc/Hz (typ mean) | -94 dBc/Hz | -113 dBc/Hz | -107 dBc/Hz | -106 dBc | -98 dBc |
| Third-order Intercept at 2 GHz | +17 dBm | + 24 dBm (typ) | +15 dBm | +16 dBm | +18 dBm | +13 dBm | +10 dBm |
| Displayed Noise with Preamp, 2 GHz | -164 dBm/Hz | -164 dBm/Hz | -161 dBm/Hz | -163 dBm/Hz | -160 dBm/Hz | -150 dBm/Hz | -152 dBm/Hz |
| ACLR DyN/Amic Range (WCDMA) | -75 db | -67 db | -68 dB | -73 dB | -73 dB | -73 dB | Not Specified |
| Amplitude Accuracy @ 2 GHz | ±0.3 dB | ±0.13 dB (typ) | ±0.2 dB | ±0.23 dB | ±0.27 dB | ±0.4 dB | ±0.5 dB |
| RTSA: Min. Event Duration for 100% Probability of Intercept, full amplitude | 0.434 µsec | 0.70 µsec | 100 µsec | 3.57 µsec | N/A | N/A | N/A |
| RTSA: max number of FFT/sec | 3,125,000 | 1,470,000 | 10,000 | 292,969 | N/A | N/A | N/A |
| RTSA: Multiple Domain Displays | Yes | Yes | Yes | Yes | N/A | N/A | N/A |
| RTSA: Multiple Domain Correlated Markers | Yes | Yes | Yes | N/A | N/A | N/A | N/A |
Radar and EW done right
Verify and validate that radar and electronic warfare systems and subsystems are working as intended, and troubleshoot when they are not. Control analysis from the time domain to get better insights into the frequency domain to ensure proper operation. See and test the smallest details and the larger trends of pulsed signals.
Highlights
- Pulse Measurement (Opt 20) characterizes 31 pulse parameters
- Cumulative statistics on millions of pulses for long term trend analysis
- Best triggering: find the pulses you need to investigate further
- Real Time DPX Spectrum and Zero Span help view trends and provide insight
Spectrum Management and Spectrum Monitoring
Unmatched “stare” bandwidth helps detect, classify and locate signals of interest, making the RSA5000 ideal for interference hunting. Detect bursted signals of interest and low signal-to-noise ratio signals other analyzers miss, and rely on long record spectrogram for signal history and frequency mask trigger with alarms aids documentation and unattended monitoring.
EMI Pre-compliance & Diagnostics
Perform pre-compliance measurements with quasi-peak detector and spurious measurements to quickly asses DUTs and ensure they will pass final EMI compliance testing. If there are failures, use powerful Real Time Spectrum Analysis (RTSA) to understand the mechanism and quickly identify root cause.
RF troubleshooting for the most difficult problems
Discover infrequently occurring signals, trigger on them, capture the signal into memory and analyze the signal fully. Track down problems with the interaction of hardware and software, power supply noise, and other difficult to measure aspects in the RF space.
Highlights
- See the signals that other analyzers miss, in real time
- Save time and gain insight with synchronized frequency, time and modulation displays without switching between modes
Reviews
There are no reviews yet.